Routing Information Protocol (Rip) - Edge-Core AS6700-32X Cli Reference Manual

Chapter 29
| IP Routing Commands

Routing Information Protocol (RIP)

Routing Information Protocol (RIP)
router rip
.
Table 166: Routing Information Protocol Commands
Command
router rip
default-information
originate
default-metric
distance
maximum-prefix
neighbor
network
passive-interface
redistribute
timers basic
version
ip rip authentication mode
ip rip authentication string
ip rip receive version
ip rip receive-packet
ip rip send version
ip rip send-packet
ip rip split-horizon
clear ip rip route
show ip protocols rip
show ip rip
This command enables Routing Information Protocol (RIP) routing for all IP
interfaces on the router. Use the no form to disable it.
Syntax
[no] router rip
Function
Enables the RIP routing protocol
Generates a default external route into an autonomous
system
Sets the default metric assigned to external routes
imported from other protocols
Defines an administrative distance for external routes
learned from other routing protocols
Sets the maximum number of RIP routes allowed
Defines a neighboring router with which to exchange
information
Specifies the network interfaces that are to use RIP routing RC
Stops RIP from sending routing updates on the specified
interface
Redistribute routes from one routing domain to another
Sets basic timers, including update, timeout, garbage
collection
Specifies the RIP version to use on all network interfaces (if
not already specified with a receive version or send version
command)
Specifies the type of authentication used for RIP2 packets
Enables authentication for RIP2 packets and specifies keys IC
Sets the RIP receive version to use on a network interface
Configures the interface to receive of RIP packets
Sets the RIP send version to use on a network interface
Configures the interface to send RIP packets
Enables split-horizon or poison-reverse loop prevention
Clears specified data from the RIP routing table
Displays RIP process parameters
Displays information about RIP routes and configuration
settings
– 820 –
Mode
GC
RC
RC
RC
RC
RC
RC
RC
RC
RC
IC
IC
IC
IC
IC
IC
PE
PE
PE