Show Udld - Edge-Core AS6700-32X Cli Reference Manual

Chapter 15
| UniDirectional Link Detection Commands

show udld

This command shows UDLD configuration settings and operational status for the
switch or for a specified interface.
Syntax
show udld [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-32/54)
Command Mode
Privileged Exec
Example
Console#show udld
Message Interval : 15
Detection Interval : 5 seconds
Recovery : Disabled
Recovery Interval : 300 seconds
Interface UDLD Mode
--------- -------- ---------- ------------------------------------- --------
Eth 1/ 1 Disabled Normal
Eth 1/ 2 Disabled Normal
Eth 1/ 3 Disabled Normal
Eth 1/ 4 Disabled Normal
Eth 1/ 5 Disabled Normal
. .
.
Console#show udld interface ethernet 1/1
Interface UDLD Mode
--------- -------- ---------- ------------------------------------- --------
Eth 1/ 1 Disabled Normal
Console#
Table 85: show udld - display description
Field Description
Message Interval The interval between UDLD probe messages for ports in advertisement phase
Detection Interval The period the switch remains in detection state after discovering a neighbor
Recovery Shows if automatic recovery from UDLD disabled port state is enabled
Oper State
Port State
Disabled
Unknown
Disabled
Unknown
Disabled
Unknown
Disabled
Unknown
Disabled
Unknown
Oper State
Port State
Disabled
Unknown
– 434 –
Msg Invl
Det Invl
7 s
5 s
7 s
5 s
7 s
5 s
7 s
5 s
7 s
5 s
Msg Invl
Det Invl
7 s
5 s