Edge-Core AS6700-32X Cli Reference Manual page 901

10g/40g top-of-rack switches
Hide thumbs Also See for AS6700-32X:
Table of Contents

Advertisement

Example
Console#show ipv6 ospf
Routing Process "ospf 1" with ID 192.168.0.2
Process uptime is 24 minutes
Supports only single TOS(TOS0) routes
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Number of incoming concurrent DD exchange neighbors 0/5
Number of outgoing concurrent DD exchange neighbors 0/5
Number of external LSA 0. Checksum 0x000000
Number of opaque AS LSA 0. Checksum 0x000000
Number of LSA received 0
Number of areas attached to this router: 2
Area 0.0.0.0 (BACKBONE)
SPF algorithm executed 2 times
Number of LSA 1. Checksum 0x001aa9
Area 0.0.0.1
SPF algorithm executed 2 times
Number of LSA 1. Checksum 0x001aa9
Console#
Table 180: show ip ospf - display description
Field
Description
Routing Process
Routing Process
OSPF process name and router ID. The router ID uniquely identifies the router in
the autonomous system. By convention, this is normally set to one of the router's
IP interface addresses.
Process uptime
The time this process has been running
Supports only
Optional Type of Service (ToS) specified in OSPF Version 2, Appendix F.1.2 is not
single TOS (TOS0)
supported, so only one cost per interface can be assigned.
routes
SPF schedule
The delay after receiving a topology change notification and starting the SPF
delay
calculation.
Hold time
Sets the hold time between two consecutive SPF calculations.
Number of
Number of neighbors currently exchanging database descriptor packets.
concurrent DD
exchange
neighbors
Number of
The number of external link-state advertisements (Type 5 LSAs) in the link-state
external LSA
database. These LSAs advertise information about routes outside of the
autonomous system.
Checksum
The sum of the LS checksums of the external link-state advertisements contained
in the link-state database.
Number of
Number of opaque link-state advertisements (Type 9, 10 and 11 LSAs) in the link-
opaque AS LSA
state database. These LSAs advertise information about external applications,
and are only used by OSPF for the graceful restart process.
Checksum
The sum of the LS checksums of opaque link-state advertisements contained in
the link-state database.
Number of LSA
The number of link-state advertisements that have been received.
received
– 901 –
Chapter 29
| IP Routing Commands
Open Shortest Path First (OSPFv3)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

As5700-54x

Table of Contents