Ip Ssh Timeout - Edge-Core AS6700-32X Cli Reference Manual

ip ssh timeout

This command configures the timeout for the SSH server. Use the no form to
restore the default setting.
Syntax
Default Setting
10 seconds
Command Mode
Global Configuration
Command Usage
The timeout specifies the interval the switch will wait for a response from the client
during the SSH negotiation phase. Once an SSH session has been established, the
timeout for user input is controlled by the
Example
Related Commands
exec-timeout (144)
show ip ssh (238)
delete public-key
This command deletes the specified user's public key.
Syntax
Default Setting
Deletes both the DSA and RSA key.
Command Mode
Privileged Exec
ip ssh timeout seconds
no ip ssh timeout
seconds – The timeout for client response during SSH negotiation.
(Range: 1-120)
Console(config)#ip ssh timeout 60
Console(config)#
delete public-key username [dsa | rsa]
username – Name of an SSH user. (Range: 1-8 characters)
dsa – DSA public key type.
rsa – RSA public key type.
– 235 –
Chapter 7
| Authentication Commands
exec-timeout command for vty sessions.
Secure Shell