Show Ip Igmp Groups - Edge-Core AS6700-32X Cli Reference Manual

show ip igmp groups

Example
The following example clears all multicast group entries for VLAN 1.
Console#clear ip igmp interface vlan1
Console#
This command displays information on multicast groups active on the switch and
learned through IGMP.
Syntax
show ip igmp groups [{group-address | interface} [detail] | detail]
group-address - IP multicast group address.
interface
vlan vlan-id - VLAN ID. (Range: 1-4094)
detail - Displays detailed information about the multicast process and
source addresses when available.
Command Mode
Privileged Exec
Command Usage
To display information about multicast groups, IGMP must first be enabled on the
interface to which a group has been assigned using the
multicast routing must be enabled globally on the system using the
routing command.
Example
The following shows options for displaying IGMP group information by interface,
group address, and static listing.
Console#show ip igmp groups
Group Address Interface VLAN
--------------- --------------- --------------- -------- -------- --------
224.0.17.17
Console#show ip igmp groups 234.5.6.8
Group Address Interface VLAN
--------------- --------------- --------------- -------- -------- --------
224.0.17.17
Console#show ip igmp groups interface vlan 1
Group Address Interface VLAN
--------------- --------------- --------------- -------- -------- --------
224.0.17.17
Console#
Chapter 22
Last Reporter
1 192.168.1.10
Last Reporter
1 192.168.1.10
Last Reporter
1 192.168.1.10
– 635 –
| Multicast Filtering Commands
IGMP (Layer 3)
ip igmp command, and
ip multicast-
Uptime Expire V1 Timer
0:0:1 0:4:19 0:0:0
Uptime Expire V1 Timer
0:0:1 0:4:19 0:0:0
Uptime Expire V1 Timer
0:0:1 0:4:19 0:0:0