Chapter 5
| SNMP Commands
SNMPv3 Commands
show snmp group
Remote SNMP EngineID
80000000030004e2b316c54321
Console#
Table 30: show snmp engine-id - display description
Field
Local SNMP engineID
Local SNMP engineBoots
Remote SNMP engineID
IP address
Four default groups are provided – SNMPv1 read-only access and read/write access,
and SNMPv2c read-only access and read/write access.
Command Mode
Privileged Exec
Example
Console#show snmp group
Group Name: r&d
Security Model: v3
Read View: defaultview
Write View: daily
Notify View: none
Storage Type: permanent
Row Status: active
Group Name: public
Security Model: v1
Read View: defaultview
Write View: none
Notify View: none
Storage Type: volatile
Row Status: active
Group Name: public
Security Model: v2c
Read View: defaultview
Write View: none
Notify View: none
Storage Type: volatile
Row Status: active
Group Name: private
Security Model: v1
Read View: defaultview
Write View: defaultview
Notify View: none
Storage Type: volatile
Row Status: active
Description
String identifying the engine ID.
The number of times that the engine has (re-)initialized since the snmp
EngineID was last configured.
String identifying an engine ID on a remote device.
IP address of the device containing the corresponding remote SNMP
engine.
– 196 –
IP address
192.168.1.19