Fan Control - Edge-Core AS6700-32X Cli Reference Manual

Fan Control

fan-speed force-full
Frame Size
Example
Console#watchdog
Console#
This section describes the command used to force fan speed.
Table 16: Fan Control Commands
Command
fan-speed force-full
show system
This command sets all fans to full speed. Use the no form to reset the fans to normal
operating speed.
Syntax
[no] fan-speed force-full
Default Setting
Normal speed
Command Mode
Global Configuration
Example
Console(config)#fan-speed force-full
Console(config)#
This section describes commands used to configure the Ethernet frame size on the
switch.
Table 17: Frame Size Commands
Command
jumbo frame
Chapter 4
Function
Forces fans to full speed
Shows if full fan speed is enabled
Function
Enables support for jumbo frames
– 125 –
| System Management Commands
Fan Control
Mode
GC
NE, PE
Mode
GC