Cli Command Groups; Table 6: Command Group Index - Edge-Core ECS4210-12P Reference Manual

Chapter 2
| Using the Command Line Interface

CLI Command Groups

CLI Command Groups
The system commands can be broken down into the functional groups shown
below
.

Table 6: Command Group Index

Command Group
General
System Management
Simple Network
Management Protocol
Remote Monitoring
User Authentication
General Security Measures Segregates traffic for clients attached to common data ports;
Access Control List
Interface
Link Aggregation
Power over Ethernet *
Mirror Port
Congestion C ontrol
Loopback Detection
UniDirectional Link
Detection
Address Table
Spanning Tree
Description
Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
Display and setting of system information, basic modes of
operation, maximum frame size, file management, console
port and telnet settings, system logs, SMTP alerts, the system
clock, and switch clustering
Activates authentication failure traps; configures community
access strings, and trap receivers
Supports statistics, history, alarm and event groups
Configures user names and passwords, command privilege
levels, logon access using local or remote authentication,
management access through the web server, Telnet server
and Secure Shell; as well as port security, IEEE 802.1X port
access control, restricted access based on specified IP
addresses, and PPPoE Intermediate Agent
and prevents unauthorized access by configuring valid static
or dynamic addresses, web authentication, MAC address
authentication, filtering DHCP requests and replies, and
discarding invalid ARP responses
Provides filtering for IPv4 frames (based on address, protocol,
TCP/UDP port number or TCP control code), IPv6 frames
(based on address or DSCP traffic class, or next header), or
non-IP frames (based on MAC address or Ethernet type)
Configures the connection parameters for all Ethernet ports,
aggregated links, and VLANs
Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port trunks
Configures power output for connected devices
Mirrors data to another port for analysis without affecting the
data passing through or the performance of the monitored
port
Sets the input/output rate limits, traffic storm thresholds, and
thresholds for broadcast and multicast storms which can be
used to trigger configured rate limits or to shut down a port.
Detects general loopback conditions caused by hardware
problems or faulty protocol settings
Detect and disables unidirectional links
Configures the address table for filtering specified addresses,
displays current entries, clears the table, or sets the aging time
Configures Spanning Tree settings for the switch
– 72 –
Page
75
83
151
173
181
245
319
345
363
375
381
391
417
411
423
437