radius-server
This command sets the RADIUS server network port for accounting messages. Use
the no form to restore the default.
acct-port
Syntax
radius-server acct-port port-number
no radius-server acct-port
Default Setting
1813
Command Mode
Global Configuration
Example
Console(config)#radius-server acct-port 181
Console(config)#
radius-server
This command sets the RADIUS server network port. Use the no form to restore the
auth-port
default.
Syntax
radius-server auth-port port-number
no radius-server auth-port
Default Setting
1812
Command Mode
Global Configuration
Example
Console(config)#radius-server auth-port 181
Console(config)#
port-number - RADIUS server UDP port used for accounting messages.
(Range: 1-65535)
port-number - RADIUS server UDP port used for authentication messages.
(Range: 1-65535)
– 217 –
Chapter 7
| Authentication Commands
RADIUS Client