Negating The Effect Of Commands; Using Command History; Understanding Command Modes; Exec Commands - Edge-Core AS6700-32X Cli Reference Manual

Chapter 2
| Using the Command Line Interface
Entering Commands
Negating the Effect of
Commands
Using Command
History
Understanding
Command Modes

Exec Commands

For many configuration commands you can enter the prefix keyword "no" to cancel
the effect of a command or reset the configuration to the default value. For
example, the logging command will log system messages to a host server. To
disable logging, specify the no logging command. This guide describes the
negation effect for all applicable commands.
The CLI maintains a history of commands that have been entered. You can scroll
back through the history of commands by pressing the up arrow key. Any
command displayed in the history list can be executed again, or first modified and
then executed.
Using the show history command displays a longer list of recently executed
commands.
The command set is divided into Exec and Configuration classes. Exec commands
generally display information on system status or clear statistical counters.
Configuration commands, on the other hand, modify interface parameters or
enable certain switching functions. These classes are further divided into different
modes. Available commands depend on the selected mode. You can always enter a
question mark "?" at the prompt to display a list of the commands available for the
current mode. The command classes and associated modes are displayed in the
following table:
Table 4: General Command Modes
Class
Exec
Configuration
* You must be in Privileged Exec mode to access the Global configuration mode.
You must be in Global Configuration mode to access any of the other configuration modes.
When you open a new console session on the switch with the user name and
password "guest, " the system enters the Normal Exec command mode (or guest
mode), displaying the "Console>" command prompt. Only a limited number of the
Mode
Normal
Privileged
Global *
– 88 –
Access Control List
CFM
Class Map
DHCP
IGMP Profile
Interface
Line
Multiple Spanning Tree
Policy Map
Route Map
Router
Time Range
VLAN Database