8.2.2
Setting the display contrast and backlight choice
ou can set the default value for the display contrast and backlight in programming mode or
parameter assignment mode.
Setting the display contrast in parameter assignment mode
Follow these steps to set the display contrast:
1. Selecting parameter assignment mode (Page 253).
2. On the parameter assignment menu, move the cursor to
3. Confirm
4. Move the cursor to
5. Confirm
6. Move the cursor to
7. Confirm
IDEC SmartRelay shows the following display:
8. To change the display contrast: Press
9. To confirm your entry: Press O
Setting the display contrast in programming mode
If you want to set the display contrast in programming mode, select menu command
the main menu, then menus
described earlier.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
: Press O
: Press
or
: Press O
: Press
or
: Press O
and
Configuring IDEC SmartRelay
8.2 Setting the default values for IDEC SmartRelay
or
. ou can now set the display contrast as
: Press
or
261
in