IDEC SMARTRELAY User Manual page 211

If acknowledgment is enabled (Ack
from 1 to 0, the message text is output until it is acknowledged with O .
cannot acknowledge the message text.
hen multiple message text functions are triggered with En 1, IDEC SmartRelay displays
the message text with the highest priority (0
IDEC SmartRelay displays a newly activated message text only if its priority is higher than
that of previously activated message texts.
After a message text is disabled or acknowledged, the function automatically shows the
previously active message text that takes the highest priority.
ou can press the
Example
This is how two message texts could be shown:
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
es) and the status of the signal at input En changes
and keys to step through multiple active message texts.
IDEC SmartRelay functions
4.4 Special functions list - SF
lowest, 127 highest). This also means that
hen En 1, you
199