IDEC SMARTRELAY User Manual page 85

Deactivating the password from Base Module
To deactivate the password to allow, for example, another user to edit your circuit program,
you must know your current password (in our example
To deactivate the password, follow these steps in the programming menu:
1. Move the cursor to
2. Confirm
Enter your current password as described in steps 5 to 7 above. Confirm your entries with
O .
3. Move the cursor to
4. Confirm
The display now shows:
Alternatively, you can also select
blank.
5. Press any key and IDEC SmartRelay returns to the programming menu. ou have now
cleared the password.
Note
This action disables the password prompt, and thus permits access without a password.
Leave the password deactivated for uicker progress through the remaining exercises and
examples.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
: Press or
: Press O
: Press or
: Press O
Programming IDEC SmartRelay
3.7 riting and starting the circuit program
).
and clear the password by leaving the input box
73