Summertime/Wintertime Conversion - IDEC SMARTRELAY User Manual

Programming IDEC SmartRelay
3.7 riting and starting the circuit program
2. On the main menu, press
opens the programming menu.
3. On the programming menu, move the cursor to
4. Confirm
5. If you are sure that you want to clear the circuit program in the memory, move the cursor to
To cancel clearing of the circuit program, leave the cursor at
3.7.15

Summertime/wintertime conversion

ou can enable or disable automatic summertime/wintertime conversion.
Note
Summertime refers to daylight saving time and wintertime refers to standard time in the
United States.
To enable/disable automatic S/
1. Switch IDEC SmartRelay to programming mode. IDEC SmartRelay displays the main
menu.
2. Select
3. Confirm
90
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
or
: Press O
and confirm with O . IDEC SmartRelay clears the circuit program and password.
Time conversion in programming mode:
: Press or
: Press O
to move the cursor to
: Press
. Press O . IDEC SmartRelay
or
and press O .
IDEC SmartRelay Manual