IDEC SMARTRELAY User Manual page 146

IDEC SmartRelay functions
4.4 Special functions list - SF
The parameter T initially appears as follows in programming mode, for example:
Valid ranges of the timebase
If an already-programmed function provides the value of T, the valid ranges of the timebase
are as follows:
Timebase
ms
s
m
The IDEC SmartRelay display appears as follows in programming mode, if you have, for
example, set the actual value of B6 in seconds to parameter T of B12:
If the referenced block (B6, in the example) returns a value that lies out of the valid range,
IDEC SmartRelay rounds the value up or down to the next valid value.
Parameter preset = Actual value of an already-programmed function
To include the actual value of an already-programmed function for parameter T, follow these
steps:
1. Press
2. Press
referenced block if it exists.
3. Press
required block number.
134
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
max. value
99990
5999
5999
to move the cursor to the equal sign of parameter T.
to change the equal sign into an arrow. IDEC SmartRelay displays the last
to move the cursor to the "B" of the shown block, and then press
Meaning
Number of ms
Number of s
Number of min
Accuracy
± 10 ms
± 1 s
± 1 min
to select the
IDEC SmartRelay Manual