Idec Smartrelay Functions; Constants And Connectors - IDEC SMARTRELAY User Manual

IDEC SmartRelay functions

IDEC SmartRelay provides you with various elements in programming mode, and organizes
them in the following lists:
•
Constants and connectors (Page 111)
•
Basic functions list - GF (Page 116)
•
Special functions list - SF (Page 127)
•
List of reusable blocks configured in the circuit program
IDEC SmartRelay FL1F can additionally provide you with the following elements in
programming mode, if you have previously configured them in your circuit program using
WindLGC:
•
UDF: List of user-defined function blocks configured in the circuit program
•
L: A Data Log function block configured in the circuit program
List contents
All lists show the elements available in IDEC SmartRelay. Usually, this includes all
connectors, basic functions, and special functions.
IDEC SmartRelay does not show all elements if:
•
You cannot add additional blocks.
This occurs when the memory space is insufficient or when you have reached the
maximum number of blocks.
•
A specific block's Memory space and circuit program size (Page 105) would exceed the
space available in IDEC SmartRelay.
•
You have created program elements in WindLGC but have not downloaded the program
to IDEC SmartRelay.
4.1

Constants and connectors

Constants and connectors represent inputs, outputs, markers, constants, and network digital
and analog inputs/outputs.
Inputs
•
Digital inputs
Digital inputs begin with the letter I. The number of the digital inputs (I1, I2, ...) corresponds
to the number of the input connectors of the IDEC SmartRelay Base Module and of the
connected digital modules, in the order of their installation. You can use the fast digital
inputs I3, I4, I5, and I6 of the IDEC SmartRelay versions FL1F-H12RCE, FL1F-B12RCE,
and FL1F-H12SCD as fast counters.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
4
111