IDEC SmartRelay functions
4.4 Special functions list - SF
Timing diagram (example)
Functional description
The function fetches the analog signal at input Ax based on the set number of samples (Sn)
and outputs the average value.
Note
There are a maximum of eight analog filter function blocks available for use in the circuit
program in IDEC SmartRelay.
Setting the Par parameter
View in programming mode (example):
View in parameter assignment mode (example):
230
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
IDEC SmartRelay Manual