IDEC SMARTRELAY User Manual page 14

Getting started with IDEC SmartRelay
Which devices are available?
Base Modules are available in two voltage classes:
•
Class 1 ≤ 24 V, i.e. 12 VDC, 24 VDC, 24 VAC
•
Class 2 > 24 V, i.e. 100 VAC/VDC to 240 VAC/VDC
Base Modules are available in two versions:
•
Base Modules (version with display): 8 inputs and 4 outputs
•
Base Modules (version without display): 8 inputs and 4 outputs
Each module has an expansion interface and an Ethernet interface and provides 44 pre-
configured standard and special function blocks for the creation of your circuit program.
Which expansion modules are available?
•
FL1F-M08... digital modules are available for operation with 12 VDC, 24 VAC/VDC and
100 VAC/VDC to 240 VAC/VDC, and are equipped with four inputs and four outputs.
•
IDEC SmartRelay analog modules are available for operation with 24 VDC and some with
12 VDC, depending on the specific module. Each is equipped with two analog inputs or
two analog outputs.
Each digital/analog module has two expansion interfaces for connecting additional modules.
Which display modules are available?
•
Base Modules
•
Text Display
Features of the Text Display
The Text Display is available for the Base Modules. It provides an additional display that is
wider than the Base Module. It has four function keys that you can program in your circuit
program as inputs. Like the IDEC Base Module, it has four cursor keys, an ESC key and an
Enter key that you can also program in your circuit program and use for navigation on the
Text Display.
You can create and download a power-up screen for the Text Display from WindLGC. This
screen displays briefly when you initially power on the Text Display. You can also upload the
power-up screen from the Text Display to WindLGC.
The Text Display provides three main menu commands, respectively for the IP address
selection of a Base Module, the remote settings of the connected Base Module, and the
independent configuration of the Text Display. The menus for the Text Display are shown in
Appendix "Text Display (Page 312)".
2
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
IDEC SmartRelay Manual