IDEC SMARTRELAY User Manual page 166

IDEC SmartRelay functions
4.4 Special functions list - SF
Functional description
A 0 to 1 transition at input Trg sets output Q.
If output Q = 0, and input Trg is set hi at least for the duration of T
the permanent lighting function and sets output Q accordingly.
IDEC SmartRelay triggers the off-delay T when input Trg returns to 0 before T
Output Q is reset when T
You can output an off-warning signal prior to the expiration of the off-delay time (T - T
resets Q for the duration of the prewarning time period T
resets T and the output Q.
If the block is retentive, IDEC SmartRelay resets output Q and the expired time to the values
before a power failure; if the block is not retentive, IDEC SmartRelay resets output Q and the
expired time to defaults after a power failure.
Setting the Par parameter
Note the defaults specified in the topic "Time response (Page 124)".
Note
T, T
View in programming mode (example):
View in parameter assignment mode (example):
154
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
= T.
a
and T must all have the same timebase.
! !L
, IDEC SmartRelay enables
L
L
. A subsequent signal at Trg always
!L
IDEC SmartRelay Manual
has expired.
) that
!