Timing diagram
Functional description
The function fetches the analog values from the inputs Ax and Ay.
Ax and Ay are each multiplied by the value of the A (gain) parameter, and the value at
parameter B (offset) is then added to the relevant product, i.e.
(Ax gain)
(Ay gain)
The function forms the difference (
Output
thresholds. See the calculation rule below.
Calculation rule
If the On threshold
If the On threshold < Off threshold, then
Off.
Setting the Par parameter
The gain and offset parameters are used to adapt the sensors to the relevant application.
View in programming mode:
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
offset
actual value Ax or
offset
actual value Ay.
is set or reset, depending on difference of the actual values Ax - Ay and the set
Off threshold, then
0 if (actual value Ax - actual value Ay)
) between the actual values Ax - Ay.
if (actual value Ax - actual value Ay)
Off.
1, if On
(actual value Ax - actual value Ay) <
IDEC SmartRelay functions
4.4 Special functions list - SF
On or
185