IDEC SmartRelay installation and wiring
2.3
iring IDEC SmartRelay
IDEC SmartRelay with transistor outputs
ou can identify IDEC SmartRelay versions with transistor outputs by the fact that the letter R is
missing from their type name. The outputs are short circuit-proof and overload-proof. An auxiliary
load voltage supply is not necessary, because IDEC SmartRelay supplies the load voltage.
Re uirements for transistor outputs
The load connected to IDEC SmartRelay must have the following characteristics:
The maximum switched current is 0.3 A per output.
Connecting
Connect the load to an IDEC SmartRelay with transistor outputs as shown below:
FL1F- 2BM2
The illustration below shows an example of how to connect the voltage or current load.
0 ... 10 V
R1
40
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
L+
M
L+
M
V1, V2: 0 ... 10 VDC
R1:
U1+ M1
I1 U2+
M2 I2
I1, I2:
R2:
0/4 ... 20 mA
R2
Earth
Standard DIN rail
>= 5 kΩ
0/4 ... 20 mA
<= 250 Ω
IDEC SmartRelay Manual