IDEC SMARTRELAY User Manual page 105

User-defined parameters
If none of the parameters/conversions apply to your country, follow these steps to customize
the settings:
1. Move the cursor to the menu item
2. Confirm with O .
The display shows:
For example, consider an example where you want to configure the following parameters:
Start of summertime
End of summertime
Time difference of 120 minutes
To configure these settings, follow these steps:
1. Press
2. Press
The display shows:
3. Confirm all your entries with O .
ou have now customized the summertime/wintertime conversion.
Note
Summertime/wintertime conversion only functions when IDEC SmartRelay is operating in
RUN or STOP mode. It does not function when the internal real time clock of IDEC
SmartRelay continues operation after a power failure (refer to Section Backup of the real-
time clock (Page 125) ).
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
31st March
1st November
or to move the flashing solid s uare/cursor.
and to change the value at the cursor position.
Programming IDEC SmartRelay
3.7 riting and starting the circuit program
: Press or
93