Setting The Display Contrast And Backlight Choice - IDEC FL1E-H12RCA User Manual

IDEC SmartRelay shows the following display.
8. Select the day of the week:
9. Move the cursor to the next position:
10.To change the value:
11.To set the correct TOD, repeat steps 9. and 10.
12.To set the correct date, repeat steps 9. and 10.
13.To confirm your entries:
To set the TOD and the date in programming mode:
If you want to set the TOD and the date in programming
mode, select 'Setup' in the main menu, then menus 'Clock'
and 'Set Clock'. You can now set the weekday and the time
as described earlier (as of step 8.).
5.2.2 Setting the display contrast and backlight
choice
You can set the default value for the display contrast
• in parameter assignment mode by means of the set menu
("LCD" menu item)
• in programming mode by means of the setup menu
("LCD" menu item).
To set the display contrast in parameter assignment mode:
1. Select parameter assignment mode (see Chapter 5.1.)
2. On the parameter assignment menu,
3. Confirm 'Set..':
4. On the Set menu, select 'LCD':
5. Confirm 'LCD..':
6. By default, the cursor points to Contrast. 
If not, move the '>' cursor to 'Contrast': Press
7. Confirm 'Contrast':
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Set Clock
Mo 15:30
YYYY-MM-DD
2008-05-26
select 'Set':
Configuring IDEC SmartRelay
The cursor is positioned
on the weekday.
Press
Press
Press
Press OK
Press
Press OK
Pres
Press OK
Press OK
or
or
or
or
or
or
241