IDEC SMARTRELAY User Manual page 116

Programming IDEC SmartRelay
3.8 Configuring additional functions for IDEC SmartRelay
Diagnosing a specific IP address
ou can check the availability of a specific IP address by following these steps:
1. In the diagnostics menu shown below, move the cursor to
2. Confirm
3. Move the cursor to
4. Confirm
5. To enter an IP address, Press O .
press
press
6. Press O to confirm your input.
displayed. If timeout occurs and the IP address is unavailable, an error message is
displayed.
IDEC SmartRelay stores up to four addresses that you entered previously. To view your
last inputs, press
drop-down list, for example:
O to comfirm.
104
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
: Press O
: Press O . IDEC SmartRelay displays the following view:
or to move the cursor to a position where you want to modify the number, then
or to increase or decrease the number.
hen pinging the IP address is successful and the IP address is available, O message is
to move the cursor to the
ou can press or to select a previously configured address in the list, and then press
: Press or
hen the cursor appears in a flashing solid s uare,
: Press
symbol, and then press O to open a
IDEC SmartRelay Manual
or