IDEC SMARTRELAY User Manual page 214

IDEC SmartRelay functions
4.4 Special functions list - SF
5. Confirm your entries with O .
6. Press
7. Increase the priority by pressing .
8. Press
9. Press
Both.
10.Press
11.Press
12.Enable or disable ticking for each line of the message text by pressing
SmartRelay displays as follows:
13.To choose between No and
14.Press
and
lines 1 and 2.
15.Position the cursor on the
No and
16.Press O to confirm the complete message text configuration.
202
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
to position the cursor on the Priority line.
to position the cursor on the Msg. Dst line.
or to toggle through the three choices for message destination: BM, TDE, or
to position the cursor on the Tick Type line.
or to select either C-C or L-L for the Tick Type .
to move the cursor to the second line, and press
es for Line 2. Configure line ticking for lines 3, 4, 5 and 6 in the same way as for
eb Show line by pressing . Press
es for eb Show .
es to define whether Line 1 ticks, press
. IDEC
or
or to choose between No
or to select between
IDEC SmartRelay Manual