IDEC SMARTRELAY User Manual page 23

Marine certification requires following conditions.
•
All 12/24VDC modules are only to be used with 24VDC power supply.
•
24V power supply line are to be protected by surge protective device ((order No. 918 402/
918 422 manufactured by DEHN+SÖHNE GmbH CO.) or equivalent).
•
When using IDEC SmartRelay FL1F in bridge and deck zones with filter ((B84113-C-B-30
manufactured by EPCOS AG) or equivalent).
Please contact us if there are any questions such as about the environment in which IDEC
SmartRelay is used.
ID for Australia
Explosion hazard
Do not disconnect equipment while the circuit is live or unless the area is konwn to be free of
ignitable concentrations.
Substitution of any components can impair suitability for Class I, Division 2. Combinations of
equipment are subject to investigation by the local authority having jurisdiction at the time of
the installation.
Recycling and Disposal
You can fully recycle IDEC SmartRelay devices due to their low-pollutant equipment. Contact
a certified electronic waste disposal center for environmentally acceptable recycling and
disposal of your old devices.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Our products carrying the label shown at the side are compliant with AS/NZS
CISPR11:2011.
WARNING
Getting started with IDEC SmartRelay
11