IDEC SMARTRELAY User Manual page 216

IDEC SmartRelay functions
4.4 Special functions list - SF
Special function
Max/Min
Average value
For timers, a message text can also display the remaining time. "Remaining time" refers to
how much time of the parameter setting remains.
Bar graphs can be either horizontal or vertical representations of the current or actual value
scaled between the minimum and maximum value. For more information on configuring and
displaying bar graphs in message texts, refer to the Online Help for WindLGC.
Editing message texts
You can only edit simple message texts from IDEC SmartRelay Basic. You cannot edit
message texts that contain features such as bar graphs, I/O status names, and others from
IDEC SmartRelay Basic. You can only edit these types of message texts from WindLGC.
Also, you cannot edit message texts from IDEC SmartRelay Basic that contain any of the
following parameters:
•
Par
•
Time
•
Date
•
EnTime
•
EnDate
•
Analog input
•
Digital I/O status
•
Special characters (for example: ±, € )
You can only edit such message texts from WindLGC.
Changing parameters in the active message text
When the message text is active, press ESC to select the editing mode.
Note
You must keep the ESC key pressed for at least one second.
Press
and
Confirm your changes with OK. You can now edit further parameters in the message text (if
any exist). Press ESC to exit editing mode.
Key input simulation in the active message text
You can enable the four cursor keys C , C , C
pressing ESC plus the relevant cursor key.
204
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
and to select the relevant parameter. Press OK to change the parameter. Use the
keys to edit a parameter.
Parameter or process variable visible in a
message text
Mode, Min, Max, Ax, AQ
Ax, St, Sn, AQ
and C in an active message text by
IDEC SmartRelay Manual