IDEC SMARTRELAY User Manual page 260

UDF (User-Defined Function)
6. Move the cursor to U1 : Press , , or .
7. Press O to enter the screen form for the first UDF block U1 . To select another element,
press the curor keys.
8. Position the cursor on the selected input ( I1 in this example) and press O . The cursor
appears in a flashing solid s uare. If you want to change the first input to another element,
press
9. Confirm your selection by pressing O . The first input of U1 is now changed.
Editing elements to the outputs of a UDF block
If IDEC SmartRelay shows the following screen form as shown in the above Step 5 and you
want to change
1. Press O and IDEC SmartRelay shows the following display:
2. Move the cursor to In by pressing . Press O and the cursor appears in a flashing solid
s uare. ou can change the input to U1.1 ( .1 refers to the first output of the UDF block
that is connected to
display:
248
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
or .
1 to another element, follow the steps below:
1 ) by pressing or and IDEC SmartRelay shows the following
IDEC SmartRelay Manual