Parameters; Selecting The Parameters - IDEC SMARTRELAY User Manual

8.1.1

Parameters

Note
ou can only view and edit parameters in the parameter assignment mode when they have
the read/write (
Parameters are, for example:
The delay times of a timer relay
The switching times (cams) of a timer switch
Counter thresholds
The monitoring time for hour counters
The trigger thresholds
A block number (Bx) and the short name of the parameter identifies each parameter. Examples:
T: ...is a configurable time
MI: ...is a configurable time interval
Note
indLGC also allows you to assign names to blocks (for more information, refer to the
chapter entitled IDEC SmartRelay software (Page 277) .
8.1.2

Selecting the parameters

To select a parameter:
1. On the parameter assignment menu, move the cursor to
2. Confirm
3. Move the cursor to
4. Confirm
IDEC SmartRelay shows the list of all available blocks, for example:
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
) designation. See the Parameter protection (Page 125) topic.
with O .
: Press or
with O .
Configuring IDEC SmartRelay
8.1 Selecting parameter assignment mode
: Press or
255