Technical Data: Fl1F-H12Scd - IDEC SMARTRELAY User Manual

Protection of output relay (if desired)
Switching rate
Mechanical
Ohmic load/lamp load
Inductive load
Notice: For fluorescent lamps with capacitors, you must consider the technical data of
fluorescent lamp ballasts. If the current exceeds the maximum allowed surge current,
appropriate contactor relays must switch the flourescent lamps.
A.4

Technical data: FL1F-H12SCD

Power supply
Input voltage
Permissible range
Reverse polarity protection
Permissible mains frequency
Power consumption from 24 VDC
Voltage failure buffering
Power loss at 24 VDC
Backup of the real-time clock at 25 °C
Accuracy of the real-time clock
Digital inputs
Number
Electrical isolation
Numbef of high speed inputs
Input frequency
•
Normal input
• High speed input
Max. continuous permissible voltage
Input voltage
Signal 0
Signal 1
Input current at
Signal 0
Signal 1
Delay time at
0 to 1
1 to 0
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
A.4 Technical data: FL1F-H12SCD
FL1F-M08C2R2
Max. 16 A,
characteristic B16
10 Hz
2 Hz
0.5 Hz
FL1F-H12SCD
24 VDC
20.4 VDC to 28.8 VDC
Yes
- -
15 mA to 50 mA (no load on digital output)
1.2 A (with max. load on digital output)
- -
0.4 W to 1.2 W
Typ. 20 days
Typ. ± 2 s/day
8
No
4 (I3, I4, I5, I6)
•
Max. 4 Hz
• Max. 5 kHz
28.8 VDC
L+
< 5 VDC
> 12 VDC
< 0.9 mA (I3 to I6)
< 0.07 mA (I1, I2, I7, I8)
> 2.1 mA (I3 to I6)
> 0.18 mA (I1, I2, I7, I8)
•
Typ. 1.5 ms
<1.0 ms (I3 to I6)
• Typ. 1.5 ms
<1.0 ms (I3 to I6)
Technical data
289