Setting The Time Of Day And Date - IDEC SMARTRELAY User Manual

Start screen settings
ou can select the Setting the start screen (Page 265) that displays on IDEC SmartRelay
when IDEC SmartRelay transfers to RUN mode in programming mode or parameter
assignment mode through the following menu commands:
Message text settings
ou can select settings that apply to all Message texts (Page 196) in programming mode or
parameter assignment mode through the following menu commands:
8.2.1

Setting the time of day and date

ou can set the time of day and the date in programming mode or parameter assignment mode.
Setting the time of day and the date in parameter assignment mode
Follow these steps to set the time of day and the date:
1. Selecting parameter assignment mode (Page 253).
2. On the parameter assignment menu, move the cursor to
3. Confirm
4. Move the cursor to
5. Confirm
6. Move the cursor to
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
: Press O
: Press or
: Press O
: Press or
Configuring IDEC SmartRelay
8.2 Setting the default values for IDEC SmartRelay
: Press or
259