Softkey - IDEC SMARTRELAY User Manual

4.4.26

Softkey

Short description
This special function has the effect of a mechanical pushbutton or switch.
Symbol in
IDEC SmartRelay
Factory setting
The default parameter setting is switching action.
Timing diagram
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
iring Description
Input En Output
input En (Enable), and if Switch On was confirmed
in parameter assignment mode.
Parameter Programming mode:
Selecting the function for pushbutton action for the
duration of one cycle, or for switching action.
Start: on or off state, initialized at the first start of the
program if retentivity is disabled.
Retentivity:
/
R
Parameter assignment mode (RUN mode):
Switch: switches the momentary pushbutton (switch)
on or off.
Output Switches on if En 1 and Switch On was confirmed
with O .
IDEC SmartRelay functions
4.4 Special functions list - SF
is set with a 0 to 1 transition of the signal at
no retentivity
the status is retentive.
205