Copying Data From Idec Smartrelay To The Card - IDEC SMARTRELAY User Manual

Using memory cards

9.3 Copying data from IDEC SmartRelay to the card

9.3 Copying data from IDEC SmartRelay to the card
Copying data from IDEC SmartRelay to the card manually
To manually copy the circuit program to the micro SD card, follow the steps shown in the
illustration below:
Press O . IDEC SmartRelay starts copying the circuit program to the card.
If power fails while IDEC SmartRelay is copying the circuit program, repeat the process after
power-on.
Note
If the program is empty, a message will display on the screen to remind you the program
in IDEC SmartRelay is empty.
The password of a protected circuit program in IDEC SmartRelay also applies to the
copied program version on your card.
Copying data from IDEC SmartRelay to the card automatically
indLGC provides an option for automatically copying the circuit program to the micro SD
card when transferring the circuit program to IDEC SmartRelay. This option is available in the
dialog for PC- IDEC SmartRelay transfer. If you select this option,
circuit program to IDEC SmartRelay and to the micro SD card.
Note
To successfully copy the circuit program from IDEC SmartRelay to the micro SD card, make
sure that the free memory space available on the micro SD card is at least 100 bytes.
270
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
indLGC transfers the
IDEC SmartRelay Manual