IDEC SMARTRELAY User Manual page 307

Fluorescent tubes with ballast (25000 switching
cycles)
Fluorescent tubes, conventionally compensated
(25000 switching cycles)
Fluorescent tubes, uncompensated (25000
switching cycles)
Derating
Short circuit-proof cos 1
Short circuit-proof cos 0.5 to 0.7
Parallel output circuits for power increase
Protection of output relay (if desired)
Switching rate
Mechanical
Ohmic load/lamp load
Inductive load
Notice: For fluorescent lamps with capacitors, you must consider the technical data of
fluorescent lamp ballasts. If the current exceeds the maximum allowed surge current,
appropriate contactor relays must switch the flourescent lamps.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
A.7 Technical data: FL1F-M08D2R2
FL1F-M08D2R2
10 x 58 W
1 x 58 W
10 x 58 W
None; across the entire temperature range
Power protection B16, 600 A
Power protection B16, 900 A
Not permitted
Max. 16 A,
characteristic B16
10 Hz
2 Hz
0.5 Hz
Technical data
295