Diagnosing Errors From Idec Smartrelay - IDEC SMARTRELAY User Manual

Programming IDEC SmartRelay
3.8 Configuring additional functions for IDEC SmartRelay
Changing IDEC SmartRelay from slave mode to master mode
IDEC SmartRelay is now in slave mode:
1. Move the cursor to
2. Confirm
IDEC SmartRelay restarts automatically and then displays the main menu.
Alternatively, you can change IDEC SmartRelay from slave mode to master mode from
indLGC. If you download a circuit program to an IDEC SmartRelay in slave mode from
indLGC, you are prompted to switch IDEC SmartRelay to master mode to complete the
downloading. For more information, refer to the Online Help for
3.8.6

Diagnosing errors from IDEC SmartRelay

IDEC SmartRelay supports error event diagnostics. ou can perform the following actions
from IDEC SmartRelay s diagnostics menu:
View software status and errors:
View hardware status and errors:
View and clear the event log, and check the availability of a specific IP address
Toggle an error event alert
100
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
: Press O
ou have now successfully changed IDEC SmartRelay from slave mode to master mode.
Connection error
Firmware version of IDEC SmartRelay
Ethernet connection error
Micro SD card error (for example, card read/write error, card is not inserted, or card is
full)
EM (expansion module) status and error (for example, bus error and configuration
update)
MAC address of IDEC SmartRelay
: Press or
indLGC.
IDEC SmartRelay Manual