Copying Data From The Card To Idec Smartrelay - IDEC SMARTRELAY User Manual

Generating the data log on the micro SD card
If your circuit program in IDEC SmartRelay includes a Data Log function block configured
from
If there is a micro SD card inserted into the slot of your IDEC SmartRelay, then when IDEC
SmartRelay switches from STOP to RUN, it attempts to copy the data log to the micro SD
card otherwise, IDEC SmartRelay saves the data log in memory. At every STOP to RUN
transition, IDEC SmartRelay determines the destination of the data log storage.
If IDEC SmartRelay copies the data log to the micro SD card, it saves the data log by default
as .CSV file format, which you can then open from a PC. Each line in the .CSV file includes a
time stamp, the function block number and the actual values recorded. For more information
about the data log, refer to Chapter Data log (Page 251) .
Note
hen IDEC SmartRelay with an inserted micro SD card is in STOP mode, you can upload
the most recent data log file on the micro SD card to
command in
the Online Help for
9.4

Copying data from the card to IDEC SmartRelay

ou can copy a circuit program from a micro SD card to IDEC SmartRelay in one of the
following ways:
Automatically during the startup of IDEC SmartRelay (PO ER ON)
By means of the card specific menu of IDEC SmartRelay
Note
If the program on the card is protected with a password, the copied program in IDEC
SmartRelay is also protected with the same password. For more information about the Card
menu, refer to Section Overview of IDEC SmartRelay menus (Page 61) .
Automatic copying during the startup of IDEC SmartRelay
To automatically copy the circuit program to the card, follow these steps:
1. Switch off the power supply to IDEC SmartRelay.
2. Insert the card into the relevant slot.
3. Switch on the power supply to IDEC SmartRelay.
IDEC SmartRelay copies the program from the memory cartridge to IDEC SmartRelay.
Note
Before you switch IDEC SmartRelay to RUN, you must ensure that the system you are
controlling with IDEC SmartRelay does not represent a source of hazard.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
indLGC, you can save the data log in your IDEC SmartRelay or on the micro SD card.
indLGC. For more information about the data log uploading command, refer to
indLGC.
hen IDEC SmartRelay finishes copying, it opens the IDEC SmartRelay main menu:
9.4 Copying data from the card to IDEC SmartRelay
indLGC using a transfer menu
Using memory cards
271