Idec Smartrelay Functions - IDEC FL1E-H12RCA User Manual

IDEC SmartRelay functions

Organization
IDEC SmartRelay provides you with various elements in
programming mode, which are organized in the following
lists:
Co: Connector list (Connector)
•
(see Chapter 4.1)
GF: List of the basic functions AND, OR, ...
•
(refer to Chapter 4.2)
SF: List of the special functions 
•
(refer to Chapter 4.4)
BN: List of reusable blocks configured in the circuit
•
program
List contents
All lists show the elements available in IDEC SmartRelay
Usually, this includes all connectors, basic functions, and
special functions. The BN list shows all the blocks that you
have created in IDEC SmartRelay.
If not all is shown
IDEC SmartRelay does not show all elements if:
• No further blocks may be added.
This is either an indication of insufficient memory space
or that the maximum number of blocks has been reached.
A specific block's memory space requirement would 
•
exceed the space available in IDEC SmartRelay
See Chapter 3.7.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
4
109