Summertime/Wintertime Conversion - IDEC FL1E-H12RCA User Manual

7. Enter your password.
8. Press OK. The circuit program and the password are
deleted.
Note
In case that you forget the password, you can delete the circuit
program and the password using WindLGC. See the onlinehelp for
WindLGC for more details.
For a base module with versions 3 and earlier, you can delete the
circuit program and the password by inputting a wrong password on
"Clear Prg" menu three times in a row.
For a base module with versions 4 or later, you can delete the circuit
program and the password by inputting a wrong password on
"Clear Prg" menu a hundred times in a row.

3.6.14 Summertime/wintertime conversion

You can enable or disable automatic summertime/wintertime
conversion
• in parameter assignment mode by calling the "Set.."
menu command
• in programming mode by calling the "Setup" menu
command.
To enable/disable automatic S/W Time conversion in
programming mode:
1. Switch IDEC SmartRelay to programming mode.
2. You are now in the main menu and want to select the
'Setup' menu command: Press
3. Confirm 'Setup':
4. Move the '>' cursor to 'Clock':
5. Confirm 'Clock':
6. Move the '>' cursor to 'S/W Time':
7. Confirm 'S/W Time':
IDEC SmartRelay shows the following display:
The current setting of automatic S/W Time conversion is
shown on the bottom row. The default setting is 'Off':
disabled.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
>On
Off
S/W Time:
Off
Programming IDEC SmartRelay
or
Press OK
Press
Press OK
Press
Press OK
or
or
97