Connecting Idec Smartrelay Inputs - IDEC FL1E-H12RCA User Manual

2.3.3

Connecting IDEC SmartRelay inputs

Requirements
At the inputs you connect sensor elements such as:
momentary pushbuttons, switches, light barriers, daylight
control switches etc.
Sensor characteristics for IDEC SmartRelay
Signal status 0 < 5 V DC < 5 V DC < 5 V DC < 5 V DC < 5 V DC < 5 V DC
Input current
Signal status 1 > 8.5 V DC > 8.5 V DC > 12 V DC > 12 V DC > 8.5 V DC
Input current
Signal status 0
Input current
Signal status 1
Input current
(1): 1.0 mA (Version 1 to 5 specifications)
(2): 8 V DC (Version 1 to 5 specifications)
(3): 1.0 mA (Version 1 to 4 specifications)
(4): 8 V DC (Version 1 to 4 specifications)
(5): 1.5 mA (Version 1 to 4 specifications)
Note
The digital inputs of FL1E-H12RCC/FL1E-B12RCC are divided into
two groups, each consisting of four inputs. Within the same group,
all inputs must be operated on the same phase. Different phases
are only possible between the groups.
Example: I1 to I4 on phase L1, I5 to I8 on phase L2.
Inputs within the FL1B-M08C2R2 may not be connected to
different phases.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
IDEC SmartRelay installation and wiring
FL1E-H12RCE/
FL1E-B12RCE
I3 ... I6 I1,I2,I7,I8
< 0.85 mA < 0.05 mA < 0.85 mA < 0.05 mA < 0.85 mA
> 1.5 mA > 0.1 mA
FL1E-H12RCA/ FL1E-H12RCA/
FL1E-B12RCA FL1E-B12RCA
FL1B-
M08D2R2 (AC) M08D2R2 (DC)
< 5 V AC
< 1.0 mA
> 12 V AC > 12 V DC
> 2.5 mA
FL1E-H12SND
I3 ... I6 I1,I2,I7,I8
> 2 mA > 0.15 mA
FL1E-H12RCC/
FL1E-B12RCC
FL1B- FL1B-
M08C2R2 (AC)
< 5 V DC < 40 V AC
< 1.0 mA < 0.03 mA
> 79 V AC
> 2.5 mA > 0.08 mA
FL1B- FL1B-
M08B2R2 M08B1S2
I1 ... I8 I1 ... I8
(1) (3)
< 0.85 mA
(2) (4)
> 12 V DC
(5)
> 1.5 mA > 2 mA
FL1E-H12RCC/
FL1E-B12RCC
FL1B-
M08C2R2 (AC)
< 30 V DC
< 0.03 mA
> 79 V DC
> 0.08 mA
35