Deleting A Block - IDEC FL1E-H12RCA User Manual

Programming IDEC SmartRelay
3.6.8

Deleting a block

Let us assume you want to delete the block B2 from your
circuit program and connect B1 directly to Q1.
I1
I2
x
Proceed as follows:
1. Switch IDEC SmartRelay to programming mode
(as a reminder, refer to Page 66).
2. Select 'Edit':
3. Confirm 'Edit':
(If required, enter your password and confirm with OK.)
4. Select 'Edit Prg':
5. Confirm 'Edit Prg':
6. Move the cursor to B2, the input of Q1 Press
B2
7. Confirm with OK.
8. Now replace block B2 with block B1 at output Q1. The
procedure:
- Select the BN list:
- Accept the BN list:
- Select 'B1':
- Apply 'B1':
Result: Block B2 is deleted, because it is no longer used in
the circuit. Block B1 has replaced B2 directly at the output.
92
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B1
x
Par
Q1
B2
Q1
IDEC SmartRelay Manual
Press or
Press OK
Press or
Press OK
:
Press or
Press OK
Press or
Press OK