Modifying Parameters - IDEC FL1E-H12RCA User Manual

5.1.3

Modifying parameters

You first select the parameter you want to edit (see Chapter
5.1.2).
You change the value of the parameter in the same way as
you did in programming mode:
1. Move the cursor to the point at which you want to make
the change:
2. To change this value:
3. To apply the value:
Note
When changing the time parameters when the system is in RUN,
you can also change the timebase (s = seconds, m = minutes, h =
hours). This does not apply if the time parameter represents the
result of another function (for an example, see Chapter 4.4.1). In
this case you can neither change the value nor the timebase.
The current time is reset to zero when you change the timebase.
Current value of a time T
View of a time T in parameter assignment mode:
You can change the configured time T.
Current timer value
View of a timer cam in parameter assignment mode:
You can change the on/off times and the day.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B9
T =80:00s
Ta =06:00s
B9
T =80:00s
Ta =06:00s
B1 1
D=M–W–F––
On = 09:00
Off=10:00
Configuring IDEC SmartRelay
Press
Press
OK
Change: Press
Move: Press
Done: OK
Configured time T
Current time T
a
or
or
or
or
237