IDEC FL1E-H12RCA User Manual page 306

Applications
Block diagram of the IDEC SmartRelay solution
Off pulse triggered with timer
Mo..Su
20:00 -- 20.01
Mo..Su
21:00 -- 21.01
Off pulse triggered with daylight control switch
Daylight
I5
control
T=
switch
1s
Advantages of the IDEC SmartRelay solution
• You can connect the lamps directly to the IDEC
SmartRelay, provided the power consumption does not
exceed the switching capacity of the various outputs.
Higher loads should be switched with a contactor relay.
• Connect the daylight control switch directly to an input of
the IDEC SmartRelay.
• You do not need an external timer, because this function
is integrated in the IDEC SmartRelay.
• Due to the reduced amount of switchgear, you can install
a smaller and space-saving distribution cabinet.
• Fewer devices are required
• The lighting system can be easily modified.
• Additional switching times can be set as required
(sequential circuit for the off pulses at the end of the day).
• The function of the daylight control switch can be easily
applied to all lamps or to a modified group of lamps.
292
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
T=
1s
x
x
I5
I3
I4
I1
x
I2
x
IDEC SmartRelay Manual
Luminous row 3
Corridor side
Q3
Luminous row
4 Corridor side
Q4
Luminous row 1
Corridor side
Q1
Luminous row 2
Corridor side
Q2