Factory Door; Requirements For A Gate Control System - IDEC FL1E-H12RCA User Manual

8.4 Factory door

The entrance to a company's premises is often closed with a
gate. The gate is only opened to let vehicles in and out.
The gate is controlled by the porter.
8.4.1

Requirements for a gate control system

• The gate is opened and closed by means of pushbuttons
in the gatehouse. The porter can monitor the operation of
the gate at the same time.
• The gate is normally fully opened or fully closed. The gate
motion can be interrupted at any time.
• An indicator lamp is switched on five seconds before the
gate starts moving and when the gate is in motion.
• A safety pressure bar prevents harm to persons and
objects from getting trapped or damaged when the gate
is closing.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Safety pressure bar
Applications
Indicator lamp
281