IDEC FL1E-H12RCA User Manual page 202

IDEC SmartRelay functions
In the block diagram below, the analog output module
operates as the lower part of the timing chart.
(example):
Analog output value
-1000
Set each parameter of the functions referring to the table
below.
Analog trigger 
(B006 in the above table)
Analog Multiplexer 
(B007 in the above table)
188
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
20mA
4mA
0
1000
Internal value Ax
Parameters
A : Gain = + 1.00
B : Offset = 0
On : On threshold = 0
Off : Off threshold = 0
p : Number of decimals: arbitrary
V1 = 0
V2 : arbitrary
V3 = Function block number with the
actual value Ax to be outputted
from AQ1
V4 : arbitrary
p : Number of decimals: arbitrary
IDEC SmartRelay Manual