Synchronization - IDEC FL1E-H12RCA User Manual

Note
To disable summertime/wintertime conversion in this menu, you
merely confirm 'Off' with OK.
Note
Summertime/wintertime conversion only functions when IDEC
SmartRelay is operating (in RUN or STOP status). It does not func-
tion when IDEC SmartRelay is in buffered operation (see Chapter
4.3.3).

3.6.15 Synchronization

Time synchronization between IDEC SmartRelay and the
connected expansion modules can be enabled/disabled in
programming mode by means of the real-time clock menu
("Clock" menu item).
1. Switch the IDEC SmartRelay to programming mode.
2. You are now in the main menu, and want to select
3. Confirm 'Clock':
4. Move the '>' cursor to 'Sync':
5. Apply 'Sync':
IDEC SmartRelay shows the following display:
The current setting of the automatic synchronization function
is displayed in the bottom row. The default setting is 'Off':
disabled.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
'Clock':
>On
Off
Sync:
Off
Programming IDEC SmartRelay
Press
Press OK
Press
Press OK
or
or
101