IDEC FL1E-H12RCA User Manual page 217

For timers, a message text can also display the remaining
time. "Remaining time" refers to how much time of the
parameter setting remains.
Bar graphs can be either horizontal or vertical
representations of the current or actual value scaled
between the minimum and maximum value. For more
information on configuring and displaying bar graphs in
message texts, refer to the WindLGC online help.
Editing message texts
Only simple message texts can be edited from the IDEC
SmartRelay base module. Text messages created in
WindLGC that make use of new features such as bar graphs,
I/O status names, and others can not be edited from the
IDEC SmartRelay base module.
Also, you cannot edit message texts from the IDEC
SmartRelay base module that contain any of the following
parameters:
• Par
• Time
• Date
• EnTime
• EnDate
You can only edit such message texts from WindLGC.
Changing parameters in the active message text
When the message text is active, press ESC to select the
editing mode.
Note
You must keep the ESC key pressed for at least one second
Press
to change the parameter. Use the
parameter.
Confirm your changes with OK. You can now edit further
parameters in the message text (if any exist). Press ESC to
exit editing mode.
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
and to select the relevant parameter. Press OK
IDEC SmartRelay functions
and keys to edit a
203