We do not need the last two inputs of the OR block for this
circuit program. You can mark the unused inputs with an 'x'.
Enter the 'x' character twice:
1. Switch to editing mode:
2. Select the Co list:
3. Accept the Co list:
4. Select 'x':
5. Apply x:
The display now shows:
B1
Note
You can invert individual inputs of the basic and special functions;
that is, if an input carries a logical "1" signal, the circuit program will
output a logical "0". On the other hand, a logical -0" is inverted into
a logical "1" signal.
To invert an input, move the cursor to the relevant position,
e.g.:
I1
I2
I3
x
Confirm with OK.
Now press
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Programming IDEC SmartRelay
Q1
B1
1
Q1
or
to invert this input:
Press OK
Press
or
Press OK
Press
or
Press OK
This is the layout of your circuit
program
B1
1
I1
I2
x
Q1
75