Setting The Default Values For Idec Smartrelay - IDEC FL1E-H12RCA User Manual

5.2 Setting the default values for IDEC Smart-
Relay
You can set the following default values for an IDEC
SmartRelay base module:
Clock settings
You can set the default values for time-of-day and date,
summertime/wintertime conversion and synchronization:
• in parameter assignment mode by means of the set menu
("Clock" menu item)
• in programming mode by means of the setup menu
("Clock" menu item).
Time-of-day and date see Chapter 5.2.1.
Summertime/wintertime conversion see Chapter 3.6.14.
Synchronization see Chapter 3.6.15.
Contrast and backlight settings
You can set the default values for the display contrast and
backlight:
• in parameter assignment mode by means of the set menu
("LCD" menu item)
• in programming mode by means of the setup menu
("LCD" menu item).
See Chapter 5.2.2.
Menu Language
You can set the language in which the IDEC SmartRelay
menus will be displayed:
• in parameter assignment mode by means of the set menu
("Menu Lang" menu item)
• in programming mode by means of the setup menu
("Menu Lang" menu item)
Number of base module Analog Inputs
The IDEC SmartRelay base modules FL1E-H12SND, and
FL1E-H12RCE/FL1E-B12RCE support four analog inputs.
Formerly they supported two. You can choose whether to
use two or four analog inputs on these modules:
• in parameter assignment mode by means of the set menu
("BM AI NUM" menu item)
• in programming mode by means of the setup menu ("BM
AI NUM" menu item)
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Configuring IDEC SmartRelay
239