IDEC FL1E-H12RCA User Manual page 227

Symbol in IDEC
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Wiring
SmartRelay
Parameter
Output AQ
IDEC SmartRelay functions
Description
Level 1 and Level 2: 
Levels to be reached
Range of values for each level: 
-10,000 to +20,000
MaxL:
Maximum value that must not be
exceeded under any
circumstances.
Range of values: 
-10,000 to +20,000
StSp:
Start/Stop offset: 
value that is added to Offset "B"
to create the start/stop level. If the
Start/Stop offset is 0, then the
start/stop level is Offset "B"..
Range of values: 
0 to +20,000
Rate:
Acceleration with which level 1,
level 2 or Offset is reached. 
Steps/seconds are issued.
Range of values: 
1 to 10,000
A: Gain
Range of values: 0 to 10.00
B: Offset
Range of values: 10,000
p: Number of decimals
Range of values: 0, 1, 2, 3
The output AQ is scaled using the
formula: 
Range of values for AQ:
0 to +32767
(Current Level - Offset "B")/ Gain "A"
Range of values:
0 to +32767
Note:
When AQ is displayed in parameter
mode or message mode, it is
displayed as an unscaled value
(engineering units: current level).
213