Idec Smartrelay Without Display - IDEC FL1E-H12RCA User Manual

IDEC SmartRelay without display

Because some specific applications do not require operator
control and monitoring units such as buttons or a display, we
provide the FL1E-B12RCE, FL1E-B12RCA and FL1E-
B12RCC versions without display.
View of a FL1E-B12RCC, for example:
Less is definitely more!
The versions without display offer you the following benefits:
• Even more cost-effective without the operating element
• Requires less switch cabinet space than conventional
hardware
• Substantial benefits with regard to flexibility and prime
costs compared to stand-alone electronic switchgear
• Of advantage even for applications in which merely two
or three conventional switching devices can be replaced
• Very easy to use
• Access protected
• Compatible to IDEC SmartRelay versions with display
• Offers the option to read data by means of WindLGC
Creating a circuit program without operator panel
There are two ways to create a circuit program for an IDEC
SmartRelay without display:
• You create the circuit program with WindLGC on your PC
and then download it to IDEC SmartRelay (see Chapter
7).
• You download the circuit program from an IDEC Smart-
Relay memory cartridge or combined memory/battery
cartridge to your IDEC SmartRelay without display (see
Chapter 6).
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
L1 N I1 I2 I3 I1 I2 I3 I1 I2 I3 I1 I2 I3 I1 I2 I3 I1 I2 I3 I1 I2 I3 I1 I2 I3 I4 I5 I6
RUN/STOP
1 2 1 2 1 2
Q1 Q2 Q3
I7 I8
1 2
Q4
C
325